Cloning Your Mac Address for Linksys Routers - Page Three
vv	PAGE 1	vv	PAGE 2	vv	PAGE 3	vv

So you Cloned the Mac Address of your network card,
but still can't get Internet access....

First Go to the Status Tab of the Router, and refresh the page
( F5 or CTRL + "R").
Look under WANto
Verify that you now have IP address and DNS address .
IF yes Click-Here, else keep reading....

The Next step is to:
1-unplug Modem
2-unplug Router
3-wait 1 minute
4-Replug Modem
Let it recycle
5-Replug Router
6-Hit F5
7-Now you have a WAN IP

So you now have an IP address under WAN
But "still" no Internet yet.....

Now we have to get the router
To Talk to your PC

We Open the IPconfig utilty
Or with XP,NT, and 2000
We Open The Command Line Utilty.

In 95/98/ME:
Hit the MORE INFO Button
Then the RELEASE Button
Then the RENEW Button

You should see a DNS IP
That is the same
as the DNS IP
That is showing on your
Status page

In NT-200-XP

Hit Start
Choose Run>br> Type CMD
To Open Up DOS

Type ipconfig /all
Check to see what your
DNS IP is
If it is Zeros or
192.168.1.1-then Type ipconfig /release
then type
ipconfig /renew

When done
Re-type ipconfig /all
And now you will see
The same DNS IP
That you see on your
Status Page

You should now be able
To get on the internet

If your still not "on"
Make sure you have no
Software Firewalls running,
Or E-mail me
for other possibilities